Maintenance Schedule; Spare Parts; Parts List; Key To Symbols - Sundstrom SR 500 EX Gebrauchsanleitung

4.4 Maintenance schedule

The schedule below represents the recommended
minimum requirement for maintenance routines in
order to ensure that the equipment will always be in
functional condition.
Before use
Inspection/lubrication
•
of battery gasket
•
Visual inspection
•
Performance check
Cleaning
Change of fan gaskets

4.5 Spare parts

Always use genuine Sundström parts. Do not modify
the equipment. The use of non-genuine parts or
modification of the equipment may reduce the
protective function and put at risk the approvals
received by the product.
4.5.1 To change the particle filters/
combined filters
Change the particle filters at the latest when they are
clogged. The fan senses when this has occurred and
provides a warning as described in 1.2 under the
heading Warning system/alarm signals. The gas filters
should preferably be changed in accordance with a
predetermined schedule. If no measurements are
made on site, the gas filters should be changed once
a week or more frequently if the pollutants can be
smelt or tasted in the head top.
Bear in mind that both filters/combined filters must be
changed at the same time and must be of the same
type and class. Proceed as follows:
• Switch off the fan unit.
• Unscrew the filter/combined filter.
• Release the filter holder. Fig. 24.
• Change the pre-filter in its holder. Clean as
necessary.
• To release the particle filter SR 510 from the
adapter, proceed as follows:
o Grip the filter with one hand.
o Place the thumb of the other hand on the
underside of the adapter at the semicircular
gap. Fig. 25.
o Then prise out the filter. Fig. 26.
• To release the particle filter SR 510 from the gas
filter, proceed as follows:
o Grip the gas filter with one hand.
o Insert a coin or some other flat object, e.g. the
filter adapter, in the joint between the particle
and gas filters.
o Then prise out the filter. Fig. 27.
Fit new filters/combined filters. See 2.5 d).
4.5.2 To change the gaskets
The gaskets in the filter mountings of the fan unit
prevent polluted air being drawn into the fan unit. They
must be changed once a year or more frequently if
wear or ageing is detected. Proceed as follows:
• Switch off the fan unit.
• Screw out the filters.
• The gasket has a groove all round and is fitted on a
flange below the threads in the filter mounting. Fig.
28.
After use Annually
•
•
•
•
• Remove the old gasket.
• Fit the new gasket onto the flange. Check that the
gasket is in place all round.
4.5.3 To change the belt
See 2.5 b)

5. Parts list

The numerals below refer to Fig. 1. at the end of the
user instructions.
Item
No. Part
1. Hood SR 561
2. Hood SR 562
3. Hood SR 520 M/L
3. Hood SR 520 S/M
4. Hood SR 530
5. Face shield SR 540 EX
6. Full face mask SR 200, PC visor
6. Full face mask SR 200, glass visor H01-1312
7. PU hose SR 550 for SR 200
7. Rubber hose SR 551 for SR 200
8. Helmet with Visor SR 580
9. Hose SR 541 for SR 540
10. O-ring for breathing hose
11. Flat gasket for hose SR 541
12. Flow meter SR 356
13. Belt SR 508 EX
13. Rubber belt SR 504 EX
14. Leather belt SR 503 EX
15. Harness SR 552 EX
16. Battery SR 501 EX, 2,1 Ah
17. Battery charger SR 513 EX
18. Fan SR 500 EX, bare
19. Gasket for fan
20. Pre-filter holder SR 512 EX
21. Pre-filter SR 221
22. Pre-filter holder SR 5153 for SR 710 R01-0604
23. Particle filter P3 R, SR 510
24. Filter adapter SR 511
25. Particle filter P3 R, SR 710
26. Gas filter A2, SR 518
27. Gas filter ABE1, SR 515
28. Gas filter A1BE2K1, SR 597
29. Combined filter
A1BE2K1-Hg-P3 R, SR 599
30. Storage bag SR 505
31. Steel net disc SR 336
32. Vaseline tube
33. Plug kit

6. Key to symbols

A Manufacturer.
B Model number.
C EN standards
applicable to fan
assisted respiratory
protective devices.
D ATEX/IECEx codes.
See under par. 8,
Approvals:
E Year of manufacture.
F Recycling symbol.
G Traceability serial
number.
H Ordering number.
I Not with ordinary
waste.
J See user instructions.
K Australian/New Zeeland standard and issuer of the
StandardsMark Licence.
Ordering No.
H06-5012
H06-5112
H06-0212
H06-0312
H06-0412
H06-6012
H01-1212
T01-1216
T01-1218
H06-8012
R06-0501
R06-0202
R06-0506
R03-0346
R06-2148
T06-2150
T06-2149
T06-2002
R06-2002
R06-2003
R06-2001
R06-0107
R06-2023
H02-0312
H02-1312
R06-0105
H02-1512
H02-7012
H02-7112
H02-7212
H02-7312
T06-0102
T01-2001
R06-2016
R06-0703
A
B
C
D
E
F
G
H
K
I
J
43