Tune To Fm Radio Stations; Program Radio Stations Automatically; Program Radio Stations Manually; Tune To A Preset Radio Station - Philips mcd 712 Benutzerhandbuch

7 Tune to FM
radio stations
1
Ensure that you have connected and fully
extended the supplied FM antenna.
2
Press TUNER.
3
Press and hold
4
When the frequency indication starts to
change, release the button.
»
The FM tuner tunes to a station with
strong reception automatically.
5
Repeat steps 3-4 to tune to more
stations.
To tune to a weak station:
Press / repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset
radio stations.
1
Press / to select a preset number to
start programing.
2
Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO] (auto) is displayed briefl y.
»
All available stations are programmed
in the order of waveband reception
strength.
»
The fi rst programed radio station is
broadcast automatically.
/ .
Program radio stations
manually
Note
•
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press ANGLE/PROG to activate
programming.
3
Press / to allocate a number from
1 to 20 to this radio station, then press
ANGLE/PROG to confi rm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
• To overwrite a programmed station, store
another station in its place.

Tune to a preset radio station

1
Press / to select a preset number
that you want.

Set RDS clock

You can use time signal broadcast together
with the RDS signal to set the clock of the unit
automatically.
1
Tune to a RDS radio station that
transmits time signals.
»
The unit reads the RDS time and sets
the clock automatically.
EN 25