Adjust Settings; General Setup; Audio Setup - Philips mcd 712 Benutzerhandbuch

6 Adjust settings

1
Press SYSTEM MENU.
2
Select a setup page.
3
Select an option and then press
4
Select a setting and then press OK /
• To return to the previous menu,
press .
• To exit the menu, press
MENU.

General setup

On [General Setup Page], you can set the
following options:
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
• [4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
• [4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
• [16:9] – For wide-screen TV: display ratio
16:9.
[OSD Language]
Select the preferred language for on-screen
display.
[Screen Saver]
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image.
• [On] – Enable the screen saver.
• [Off] – Disable the screen saver.
22 EN
[DIVX (R) VOD]
Display the DivX
.
.
SYSTEM

Audio setup

On [Audio Setup Page], you can set the
following options:
[Digital Audio Setup] > [Digital Audio Setup
Page] > [Digital Output]
Select audio formats supported by the
connected device.
•
•
•
16:9 (Wide Screen)
[Dolby Digital Setup] > [Dual Mono]
Select audio signals output to speakers.
•
•
•
[3D] > [3D Processing Page] > [Reverb
Mode]
Select a virtual surround sound mode.
[HDCD] > [HDCD Setup Page] > [Filter]
When you play a HDCD (High Defi nition
Compatible Digital) disc, select the audio
output cutoff frequency.
®
registration code.
Tip
•
Enter this DivX registration code when you
rent or purchase video from http://vod.divx.
com/. The DivX videos rented or purchased
through the DivX ® VOD (Video On Demand)
service can be played only on the device to
which it is registered.
[Off] – Turn off the digital output.
[All] – If the connected device supports
multi-channel audio formats, select this
option.
[PCM Only] – If the connected device
cannot decode multichannel audio, select
this option.
[Stereo] – Output multichannel sound
signals to both speakers.
[L-Mono] – Output left mono sound
signals to both speakers.
[R-Mono] – Output right mono sound
signals to both speakers.