Modelling Lamp Features & Setup - Elinchrom D-Lite 4 it Gebrauchsanleitung

Programmable features - Reset
How to „Reset" the D-Lite it
In case you need to „RESET" the D-Lite it to the manufacturer settings please follow the steps below:
1. Switch the unit "off"
2. Press both flash power up / down buttons (10) at the same time and switch the unit on
3. The Digital LED multi display (6) flashes in fast mode
4. Do not continue to press the buttons, the resetting procedure is completed
Modelling lamp features & setup
Modelling lamps and fuses for 110 V & 230 V
Unit
D-Lite 2 it
D-Lite 4 it
* Do not use energy saving lamps
Modelling lamp modes
>
Setting: • Press "Modelling" button to set Modelling lamp ON to proportional mode, max.
• Press "Modelling" up or down button to set Modelling lamp to free mode, press
>
LED Indication:
!
Downloaded from www.Manualslib.com
Modelling lamp 110V
100W / 23006
100W / 23006
mode, min. mode, or OFF
"Free/Prop" to switch Modelling lamp OFF.
• LED is on: only in proportional mode.
• LED is off: in min. / max. / off mode.
• Please use only original ELINCHROM modelling lamps with a maximum power
of 100W ( effective 150W).
manuals search engine
Modelling lamp 230V
100W / 23002
100W / 23002
English
Socket Fuse
E27 2.5AF / 19035
E27 2.5AF / 19035
8