Frequency Channel - Elinchrom D-Lite 4 it Gebrauchsanleitung

Fig. 2

Frequency Channel

Note:
Transmitter and the corresponding Transceiver RX the Universal Receiver or the EL units with
integrated EL-Skyport Receiver must have the same frequency channel settings!
Frequency
Channel
1 (default)
2
3
4
EL-Skyport Sync Speed & Standard Mode
The SPEED function is available for Ranger Quadra AS, BXRi 250 / 500 und D-Lite it and all other units,
when used with the EL-Skyport Universal Speed.
Select "Speed" sync mode
Synchronises SLR cameras up to 1/250 s, or compact digital cameras up to 1/2850 s
- Press test push button one time to switch module on.
- Press test push button for minimum 5 seconds until the STATUS LED flashes two times.
- Release test push button.
- Now the EL-Skyport Transmitter Eco works in "SPEED" mode (r.2 mode).
Select "Standard" triggering mode
Synchronises SLR cameras up to 1/200 s, or compact digital cameras up to 1/1600 s
- Press test push button one time to switch module on..
- Press test push button for minimum 5 seconds until the STATUS LED flashes one time.
- Release test push button.
- Now the EL-Skyport Eco works in "STANDARD" mode.
EL-Skyport Module Configuration:
Only possible with EL-Skyport PC / MAC software v3.0 and higher.
- Power-Save Timer, individual programmable or disabled.
- Trigger delay is programmable from 250 microsecondes (1/4000 s) up to 15 s.
- Download the FREE EL-Skyport Software 3.0 from www.elinchrom.com
Downloaded from www.Manualslib.com
Four Frequency
channel selectors
Slide Button configuration
1
Off
On
Off
On
manuals search engine
Frequency
/ Mhz
2
Off 2456
Off 2458
On 2460
On 2462
Status LED
Flash Test
17