Geutebruck GSD-682 Installationsanleitung Seite 86

CeiIing Mounting with Straight Tube
The straight tube is available in different length: 25 cm and 50 cm.
Items needed:
Follow the steps to mount the dome with the straight tube.
1) Ensure that the ceiling can support the weight of the dome camera and
straight tube.
2) Make a cable entry hole on the ceiling.
3) Fix the suspension bracket to the ceiling with proper screws and screw
anchors (not supplied).
4) Thread the cables through the straight tube and the Indoor Mount kit.
5) Fix the Indoor Mount Kit to the straight tube with the supplied screws and
washers.
6) Take out the Lock Screw
Plate from the small bag in the Indoor Mount
Kit's package and attach it to the dome back
plate, as shown in the picture.
7) Fix the plate onto the dome back with the
small screw, as marked in the figure.
Downloaded from www.Manualslib.com
Dome Camera
Straight Tube and other equipped items (optional accessory)
Indoor Mount Kit and attached components (optional accessory)
Screws and Screw Anchors for fixing the straight tube onto the ceiling (not
supplied)
NOTE: For the concern of appearance, it is suggested to remove the
waterproof rubber equipped with the straight tube during installation.
manuals search engine
20