Geutebruck GSD-682 Installationsanleitung Seite 116

• DIRECTION
The item is for setting the AUTOPAN direction of the dome camera. The dome
wiII start to pan clockwise from the start point to the end point if your selection is
<RIGHT> and then return to the start point. The dome wiII start to pan counter-
clockwise from the start point to the end point if your selection is <LEFT>. Refer
to the diagram below.
• SPEED
The item is for defining the dome camera rotation speed while running
autopan. The speed is adjustable from 1 to 4 (10 ~ 45 degree/sec.).
• RUN AUTOPAN
After all settings related to autopan are completed, select this item to execute
the autopan function. Press the <CAMERA OFF> button (<ENTER>) to run an
autopan path.
• EXIT
Exit the AUTOPAN setup menu; go back to the MAIN PAGE 2 to carry on
setup of cruise.
Downloaded from www.Manualslib.com
Start Point
LEFT
(anti –clockwise)
End Point
MAIN PAGE 2
ID DISPLAY ON
TITLE DISPLAY OFF
TITLE SETTING 01
PRESET ENTER
SEQUENCE ENTER
AUTOPAN ENTER
CRUISE ENTER
HOME SETTING ENTER
NOTE: Users could execute the autopan function through a keyboard.
Please refer to the control keyboard's quick guide for further information.
manuals search engine
RIGHT
(clockwise)
50