Geutebruck GSD-682 Installationsanleitung Seite 69

Cautions
• Handle the camera carefully.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be
damaged by improper handing or storage.
• Installing electricity wiring carefully.
Ask qualified personnel of electrical wiring for the installation. Please note that
input electricity to the unit is at tolerance of AC 24V ± 10%.
The camera is capable of surge protection; ensure AC power model unit
grounded appropriately against damage of heavy current or electric shock. Refer
to the camera's installation guide for more information.
• Do not disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
• Do not block cooling holes on the bracket.
This camera has a cooling fan inside. Blocking the cooling holes leads to buiId up
heat in the camera and may cause malfunction.
• Do not operate the camera beyond the specified temperature, humidity or
power source ratings.
Use the GSD-88 under conditions where temperature is between
The GSD-68 is ONLY for indoor usage (0 °C ~ +4 °C recommended)!!
• Do not expose the camera to rain or moisture, or try to operate it in wet
areas.
This product is designed for dry use or locations where it is protected from rain
and moisture. Turn the power off immediately if the camera is wet and ask a
qualified service person for servicing. Moisture can damage the camera and also
create the danger of electric shock.
• Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove,
use a mild detergent and wipe gently.
Downloaded from www.Manualslib.com
°C (-58 °F ~ 122 °F; IP66) and humidity is below 90%.
manuals search engine
3