Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STEP 3
Place the red sticker on the
ceiling plate, and cut the circle
part out of the ceiling.
STEP 4
Put up the T-Bar into the ceiling
opening.
STEP 5
Rotate T-Bar wings of the
hinge to fix the T-Bar at the
edge of the ceiling opening.
STEP 6
Tighten the screws, and the
T-Bar wings will adhere to the
ceiling.
STEP 7
Put the data cable down
through the center hole of the
T-bar and connect it to the
dome body.
18
Downloaded from
www.Manualslib.com
manuals search engine
Werbung
Kapitel
Inhaltsverzeichnis
