Geutebruck GSD-682 Installationsanleitung Seite 81

Items needed:
Dome Camera
Hard Ceiling Mount and Decoration Ring (Supplied)
Fixing Plate (Supplied)
Follow the steps to install the high speed dome camera for hard ceilings.
STEP 2
Remove the Decoration Ring from the Hard
Ceiling Mount.
STEP 3
Attach the mount to the ceiling. Mark the
locations where all three ceiling holes should go.
STEP 4
Drill these holes on the hard ceiling.
STEP 5
Fix the mount to the holes on the hard ceiling
with three screws, as marked in the figure.
STEP 6
Thread the data cable through the center hole of
the mount and connect the cable to the dome
body.
Downloaded from www.Manualslib.com
STEP 1
Screw the Fixing Plate to your Dome Body.
manuals search engine
15