Gently press the upper dome body
downward with two hands on the side of
the cover.
DO NOT press the cover as shown in the picture
on the right hand side; this might cause the
damage on the dome body.
Screw the two dome bodies together. It should be
done if the lower dome body looks swelled.
Connect the attached RS-485, power and
BNC cables with your arranged cables.
Put the cable through the wall mount adapter
the top mount.
Mount the top holder to the wall mount adapter
and rotate the top holder to lock. Screw in bolt
to lock top holder.
11
Downloaded from
www.Manualslib.com
manuals search engine