Samsung dvd p191 Bedienungsanleitung Seite 10

connections
Connection to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the pic-
ture element into black and white(Y), blue(P b ), red(P r ) signals to present clear and clean images. (Audio
signals are delivered through the audio output.)
1
Using component video cables, connect the COMPONENT
VIDEO OUT terminal on the rear of the DVD player to the
COMPONENT IN terminal of TV.
2
Using the audio cables, connect the AUDIO (red and
white) OUT terminals on the rear of the DVD player to the
AUDIO (red and white) IN terminals of TV. Turn on the
DVD player and TV.
3
Press the input selector on your TV remote control until
the Component signal from the DVD player appears on the
TV screen.
4
Set the Video Output to I-SCAN in the Display Setup
menu. (See pages 27)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)
- The component terminal of TV can be marked by "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "P r , P b , Y"
depending on the manufacturer. The number and position of terminals can vary depending on the TV set.
Please refer to the user's manual of the TV.
- There is no commponent video displayed when " Scart-RGB" selected by pressing video select button on
the remote control
10_ connections
do not use the connection
Scart and Component Video
(Y, Pb, Pr) simultaneously.
WHITE
RED
BLUE
RED
Component cable
Audio Cable
WHITE
RED BLUE GREEN
RED
GREEN