Troubleshooting - Mitsubishi Electric VS-50VL10U Bedienungsanleitung

Troubleshooting

Please check the following before contacting your dealer for service. Errors in signals are
apt to be taken for problems in the projector.
No images appears on the screen
H u e o f t h e i m a g e i s n o t
appropriate.
The cabinet makes a creak
The status LED lights.
EN-14
Downloaded from www.Manualslib.com
Problems
•Check the power cord is connected firmly.
•Check the correct input signals are selected for the terminals of the
external devices.
•Check the external devices are connected to the terminals firmly.
•Check the external devices are turned on.
•Check the appropriate signal is input from the external device to the
projector.
•Check the signal connection between the external device and the projector.
•It sounds when the cabinet expands or shrinks because of change in the
ambient temperature, which doesn't affect projector's performance.
•When a failure occurs in the projector, the
status LED on the terminal panel shows any
figure of 0 to 7 in red and the projector turns
off automatically. Please contact your
Mitsubishi dealer immediately in such a
case.
manuals search engine
Remedies
STATUS
STANDBY