Mitsubishi Electric VS-50VL10U Bedienungsanleitung Seite 12

5.
Hold the handle and pull out the lamp
cartridge
•Be sure to grip the handle with one hand and
hold the lamp cartridge with the other hand to
pull it out safely.
•Do not touch the glass envelop of the lamp. It
may cause burns.
6.
Insert a new lamp cartridge into the
lamp storage to the end.
•Do not touch the glass envelop of the lamp with
your fingers. The oil on your fingers may
cause damage or explosion of the lamp.
•Be sure to grip the handle with one hand and
hold the lamp cartridge with the other hand to
insert it safely. Be careful not to pinch your
hand in the lamp cartridge storage.
7.
Tighten up the lamp cartridge fixing
screws.
8.
Close the door of the lamp cartridge
storage.
9.
Tighten up the screw on the door of the
lamp cartridge storage.
10.
Carry out the adjustments after replacement of the lamp cartridge.
You can project images after replacing the lamp cartridge. However, the following adjustments are
required to enjoy the equivalent image quality to that offered before the replacement of the lamp
cartridge. Please contact your Mitsubishi dealer for the following adjustments. Do not attempt to
carry out the adjustments by yourself.
• 6 axes adjustment
• CSC adjustment
• Reset of the lamp timer
EN-12
Downloaded from www.Manualslib.com manuals search engine
Screw
Lamp cartridge
fixing screws