Maintenance - Mitsubishi Electric VS-50VL10U Bedienungsanleitung

Maintenance

• Be sure to unplug the power cord from the wall outlet before maintenance of the product.
• Keep any volatile compounds such as an insecticide from attaching to the body or the screen of the
projector. Do not leave any rubber or plastic materials touching the projector or the screen for a long
time. It may cause deterioration of the projector or the coating may peel off.
Cleaning the projector
• Use a soft lint-free cloth to clean the projector. To remove sticking dirt, wipe the dirt off the projector
using a cloth dampened with a diluted mild detergent and then wipe the projector with a dry cloth.
• Do not use benzine or thinner to clean the projector. It may cause deterioration of the projector or the
coating may peel off.
Cleaning the ventilation slots
When the ventilation slots become clogged with dirt or dust, air circulation inside the projector may be
blocked and the inside temperature may rise causing troubles. Clean the ventilation slots every 100 hours
of use.
• Turn off the projector and unplug the power cord from the wall outlet.
• Vacuum the dirt or dust from the outside of the slots using a cleaner with a brush adapter. Do not use a
cleaner without a brush nozzle or do not use a nozzle adapter to clean the slots.
Cleaning the inside of the projector
If you keep using the projector with dirt or dust inside without cleaning, a fire or troubles may occur. Be
sure to contact your Mitsubishi dealer for cleaning the inside of the projector. Do not attempt to clean the
inside by yourself.
Downloaded from www.Manualslib.com manuals search engine
EN-13