Bluetooth Operation; Troubleshooting; Specifications - Party Light & Sound PARTY-215LED-MKII Bedienungsanleitung

EN
memory (the radio starts an automatic search for available radio stations and saves them automatically). The
station's number stored depends on the radio signal in your area.
During the search, press PLAY button on the remote control to stop searching.
3. Use the  and  keys to listen to the various radio stations saved in memory.
4. To change to a preset station, use the number keys on the remote control.
For example, to call up the station number 12, first press 1 and then 2.

BLUETOOTH OPERATION

Bluetooth frequency range:2402-2480MHz
1. Turn on the unit and press the input selector button on unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as "PARTY-215LED".
4. Press the  to start playing and the buttons  and  for the selection of songs.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your
retailer.
Problem
No sound when power
on
No sound from the
microphone
No sound after insert-
ing USB/SD card
If Speaker makes loud
noises

Specifications

Woofers .......................................................................................................................................2x 15"/38cm
Tweeter ..........................................................................................................................................1.5"/3.8cm
Power max ........................................................................................................................................... 1000W
Input voltage .................................................................................................................... 100-240V~50/60Hz
Battery ............................................................................................................................................ 12V�� 7Ah
Bluetooth band ....................................................................................................................... 2402-2480MHz
Maximum radio-frequency power transmitted ...................................................................................-2.1dBm
FM frequency band .................................................................................................................... 87.5-108MHz
UHF mic frequency .............................................................................................................. 863.5 / 864.5MHz
Dimensions ................................................................................................................... 450 x 350 x 1090mm
Weight ................................................................................................................................................ 19.91kg
Possible cause
1. No input source
2. Volume down
1. Bad mic connection
2. Mic not switched on
3. Mic volume down
1. Incorrect file format
2. Bad connection of USB/SD card
1. Microphone switched on but may be
too close to the speaker
2. Microphone switched on but is not
being used.
3. Microphone volume may be too loud
4. Mobile phone is being used too close to
the speaker
5. Other wireless equipment may be
placed very close to the speaker.
Solution
1. Connect an AUX signal
2. Adjust volume
1. Plug in the mic properly
2. Switch mic on
3. Increase mic volume
1. File format should be MP3
2. Plug in USB/SD card properly
1. Keep the microphone 2 meters away
from the speaker
2. Turn off microphone if not in use.
3. Adjust microphone volume to lower
mode
4. Keep mobile away from the speaker
whilst attending a call.
5. Keep the speaker away from other
wireless equipment
5