Bluetooth Operation - Party Light & Sound PARTY-15PACK Bedienungsanleitung

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

13. Play/pause in USB/SD/Bluetooth mode. In FM mode, press and hold this button to start searching for

radio stations and store them automatically in the memory

14. In USB/SD/Bluetooth mode: press to go to the next track. In FM mode: press to go to the next stored

FM station.

15. USB stick input

16. Mini SD card input

17. ON/OFF switch of the system

18. AC input connector

CONNECTION OF THE WIRED MICROPHONE

Connect the microphone to the MIC IN socket and switch it on. Note: If you are playing music from any

other input, connecting the microphone will not mute the sound output.

KARAOKE Function

This feature is available with any input. Play a track through AUX/USB/SD/FM/Bluetooth, connect a

microphone and sing along.

Built-in REC function

1. Plug a microphone into the MIC IN input.

2. Insert a USB/SD card into the corresponding port. Press Input selector button and select USB/SD mode.

3. If the USB/SD card is plugged into the speaker for the first time, the system will automatically create a

folder named 'record' to save the recorded files.

4. When you are ready to record, press REC button to record the sound of the wireless or wired

microphone.

USB/SD Operation

Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could

generate interference. If the speaker stops working, switch it off and on again, or unplug USB/SD/MMC

card and re-plug it. The speaker should be back to normal status.

The maximum size of USB/SD device that can be connected is 32 GB.

Supported music formats: MP3, WMA

FM RADIO FUNCTION

1. Turn on the unit and press repeatedly the input selector key on unit and select FM function (the display

will show the frequency).

2. Press the PLAY/PAUSE button on the unit or the key  on remote control to activate the auto

memory (the radio starts an automatic search for available radio stations and saves them automatically).

The station's number stored depends on the radio signal in your area.

During the search, press PLAY button on the remote control to stop searching.

3. Use the  and  keys to listen to the various radio stations saved in memory.

4. To change to a preset station, use the number keys on the remote control.

For example, to call up the station number 12, first press 1 and then 2.