Herunterladen Inhalt Inhalt Diese Seite drucken

Party Light & Sound PARTY-215LED-MKII Bedienungsanleitung Seite 4

Stand-alone active speaker 2 x 15" 1000w with bt, usb, sd, remote, 2x uhf mics & led running light
Vorschau ausblenden Andere Handbücher für PARTY-215LED-MKII:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Installing Batteries in the remote control & wireless mics
Remove the battery cover from the remote control or wireless mic and insert 2x AAA size batteries (remote con-
trol) or 2x AA batteries (wireless mic) ensuring correct polarity
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste but deposed correctly in
accordance with your local regulations..
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
When the internal batteries are not to be used, remove them to avoid damage caused by battery leakage or corrosion.
ATTENTION: Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type.
WARNING :Do not swallow the battery. Danger of chemical burns. Keep new and old batteries out of the reach of children.
If the battery compartment doesn't close properly, stop using the product and keep it out of the reach of children.
If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body, contact imme-
diately a doctor.
Use of the Remote Control
Please operate the remote control within a distance of 6m and 30° between the remote and the appliance. Aim
the remote at the sensor. Remove all obstacles between the remote and the sensor.
The remote control might not work properly if the sensor is exposed to strong sunshine.
If the remote control doesn't work properly, please check the batteries.
DESCRIPTION OF THE REMOTE CONTROL
1. Stand-by
2. Input selector
3. Mute
4. Play/pause. In FM mode : auto search for radio stations
5. Back to previous track
6. Next track
7. EQ
8. Reduces the volume
9. Increases the volume
10. Repeat current track
11. Direct input of the track number on the USB stick or SD card
CONNECTION OF A WIRED MICROPHONE (not included)
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound output.
USING THE WIRELESS MICROPHONE
Open the battery compartment and insert two AA batteries with the correct polarity.
Turn the switch on the mic to ON. If the green power indicator lamp doesn't flash or light up, check if the batte-
ry has been properly inserted.
Start singing into the microphone and adjust the volume to the desired level.
When the red indicator lamp on the mic starts flashing and then lights up, you have to replace the battery.
Don't use the microphone close to the speaker in order to avoid feedback.
KARAOKE Function
This feature is available with any input. Play a track through AUX/USB/SD/ FM/Bluetooth, connect a microphone
and sing along.
USB/SD Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could generate
interference. If the speaker stops working, switch it off and on again, or unplug USB/SD card and re-plug it. The
speaker should be back to normal status.
The maximum size of USB/SD device that can be connected is 32 GB.
Supported music formats: MP3, WMA
FM RADIO FUNCTION
1. Turn on the unit and press repeatedly the input selector key on unit and select FM function (the display will
show the frequency).
2. Press and hold the PLAY/PAUSE button on the unit or the key  on remote control to activate the auto
4
EN
1
2
POWER
MODE
3
1
2
11
4
5
6
7
8
9
3
0
MUTE
7
EQ
10
USB/SD
REP
5
6
4
9
8
VOL-
VOL+

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

15-6105pls

Inhaltsverzeichnis