Bluetooth Operation; Troubleshooting; Specifications - Party Light & Sound PARTY-MOBILE8-SET Bedienungsanleitung

EN
desired length and secure it via the screw. Insert the rod into the hole on the bottom of the speaker.

BLUETOOTH OPERATION

1. Turn on the unit and press the input selector button on unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as «PARTY-MOBILE8-SET».
4. Press the  to start playing and the buttons  and  for the selection of songs.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your retai-
ler.
Problem
No sound when power
on
No sound from the mi-
crophone
No sound after inserting
USB/TF card
If Speaker makes loud
noises

Specifications

Input voltage
Built-in battery
Play time at average volume
BT frequency
Max. RF transmission power
Max. height of stand
Dimensions
Weight
Correct disposal of the product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
Possible cause
1. No input source
2. Volume down
1. Bad mic connection
2. Mic not switched on
3. Mic volume down
1. Incorrect file format
2. Bad connection of USB/TF card
1. Microphone switched on but may be
too close to the speaker
2. Microphone switched on but is not
being used.
3. Microphone volume may be too loud
4. Mobile phone is being used too close
to the speaker
5. Other wireless equipment may be
placed very close to the speaker.
Solution
1. Connect an AUX signal
2. Adjust volume
1. Plug in the mic properly
2. Switch mic on
3. Increase mic volume
1. File format should be MP3
2. Plug in USB/TF card properly
1. Keep the microphone 2 meters away
from the speaker
2. Turn off microphone if not in use.
3. Adjust microphone volume to lower
mode
4. Keep mobile away from the speaker
whilst attending a call.
5. Keep the speaker away from
other wireless equipment
5V 2A via supplied USB charging lead
Lithium 3.7V – 1800mAh
2 hours
2402-2480MHz
2.2dBm
0.7m
25 x 21 x 38cm
2.75kg
7