Specifications - Makita GA027G Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for grinding, sanding, wire brushing
and cutting of metal and stone materials without the use
of water.
Noise
The typical A-weighted noise level determined according to EN60745-2-3:
Model
GA027G
GA028G
GA029G
GA030G
GA031G
GA032G
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
with BL4025
with BL4040
GA027G GA028G GA029G
100 mm 115 mm 125 mm
(4") (4-1/2")
6.4 mm 7.2 mm
M10 M14 or 5/8"
(country specific)
2.9 - 3.4 kg 3.0 - 3.6 kg 3.0 - 4.5 kg 2.8 - 3.4 kg 2.9 - 3.6 kg 3.0 - 4.4 kg
D.C. 36 V - 40 V max
Sound pressure Sound power level
level (L ) : (dB(A)) (L
pA
81
81
82
81
81
82
9 ENGLISH
GA030G GA031G
100mm 115 mm
(5") (4") (4-1/2")
6.4 mm
M10 M14 or 5/8"
(country specific)
-1
8,500 min
413 mm
425 mm
BL4025 / BL4040
DC40RA
Uncertainty (K) :
) : (dB(A)) (dB(A))
WA
92
92
93
92
92
93
GA032G
125 mm
(5")
7.2 mm
3
3
3
3
3
3