Installation - VOSS.farming Sunny 200 Bedienungsanleitung

200
7.1

INSTALLATION

NOTICE
Ensure that the energiser is placed securely during installation. The energiser
must be operated upright with the cover closed.
1. Select a location, taking into account the general safety instructions, that meet the
following criteria:
next to the electric fence and preferably near the centre of the electric fence
ƒ
where the highest solar radiation in the season is reached
ƒ
where a good grounding can be achieved
ƒ
on solid ground away from possible flooding and out of reach of animals and
ƒ
children (inside a protective fence if necessary)
2. Mount the unit in a suitable location. You can use the supplied mounting post for
this purpose.
WARNING
Fire hazard. Only install the unit on a fireproof surface.
Info
► The mounting post also serves as grounding for the energiser.
► Align the energiser so that the solar panel faces south in the northern
hemisphere or north in the southern hemisphere.
Recommendations for further grounding
The correct grounding of your energiser is extremely important! Only then will
your fence work correctly and reach its full performance. You should choose a
damp and overgrown place for earthing. It is generally advised to use galvanised
metal rods with a minimum length of 75 cm. For dry soils and long fences, place
additional ground poles at intervals of about 2–3 m to improve the grounding.
We recommend Art: 33615 as the connection cable between the grounding rods.
If you ensure sufficient grounding, the VOSS.farming Sunny will reach its full
performance and you will achieve the best possible fence security.
28
INSTRUCTION MANUAL VOSS.FARMING SUNNY 200
42082| 09 | 2020 | V2