Printable Area And Print Alignment; Setting The Printable Area; Adjusting Print Alignment - Rimage Professional 2450 Benutzerhandbuch

Printable Area and Print Alignment

12.1: Setting the Printable Area

This functionality allows you to adjust the printable area settings for
standard CD/DVD/Blue-ray media, which sets the outer and inner
diameters to print the disc label without overlapping the disc edges.
Tip: Printable area settings created within a CD Designer label file
will override the printer and fax settings on Windows.
1. Access Printing Preferences. (Refer to page 11 for instructions.)
2. Select the Advanced tab.
3. Select the Modify button in the Printable Area section
• To modify only Standard Area settings, select the Standard radio
button.
To print on a disc with a stacking ring, select the Advanced radio
•
button to access the Hub Area measurements.
• Select the desired Unit radio button to choose between 1mm
and .0.1mm units of measurement
4. Select OK, which will close the Printable Area Settings window.
5. Click Apply to save the selected settings.
6. Select OK to close the Printing Preferences window.

12.2: Adjusting Print Alignment

1. Select Start > Settings> Devices > Printers & Scanners.
2. Select Rimage Everest 400 if it is not the default already and then
click the Manage button.
3. Select Printing Preferences.
4. Select the Utility tab.
5. Select the Status Monitor button. The Rimage Everest 400 Status
Monitor window will open with the Status tab active.
6. Select the Printer Information tab to view or change the Print
Alignment Settings and Color Density Settings, or view the Everest
400 Printer Status.
2004849_A
For more information visit rimage.com/support
Tip: On the Status tab, you can view the progress of a print job, the
type of print ribbon installed, the estimated amount of remaining
ribbon, and the estimated number of label prints remaining.
Tip: Refer to the Troubleshooting Color Matching document
regarding how and when to modify the Color Density settings.
12