Setting Printing Preferences; Accessing Printing Preferences; Changing The Ribbon Settings; Changing Print Quality Settings - Rimage Professional 2450 Benutzerhandbuch

Setting Your Printing Preferences
This section provides the information needed to set up your Printing
Preferences, which allows you to customize the settings of the
integrated Everest 400 to use its more advanced features.
Important: Unless otherwise indicated, all Windows navigation
statements are Windows 10 paths. Other Windows versions may differ.

11.1: Accessing Printing Preferences

Access Printing Preferences through the Start Menu
When you use this method, the Printing Preferences are saved are
applied by default to all newly created labels.
1. Select Start > Settings> Devices > Printers & Scanners.
2. Select Rimage Everest 400 on HID-0 if it is not the default already
and then click the Manage button.
3. Select Printing Preferences.
Access Printer Preferences through CD Designer Software
When you use this method, the Printing Preferences are saved with the
label file and are used instead of the printer driver settings.
1. Open the desired label file in CD Designer.
2. From the File menu, select Print.
3. From the Name dropdown list, select the Rimage Everest 400 printer
on HID-0 if it is not the default already.
4. Select the Document Properties button.
Tip: Refer to the Troubleshooting Color Matching
document to address any color printing issues at
rimage.com/support.
2004849_A
11.2: Changing the Ribbon Type Settings
The Ribbon settings should be modified if you change between
CMY and Monochrome ribbons. To change the settings:
1. Access Printing Preferences.
2. Select the Main tab
3. Choose the installed ribbon type from the Ribbon drop
4. Click on the Apply button to retain your changes.
5. Click on the OK button to exit the window.
Important: In the Main tab of Printing Preferences, do not
change the settings for Media Type, Media Size, Copies, or
Orientation unless instructed to do so by a Rimage Technical
Support Representative.

11.3: Changing Print Quality Settings

The Print Quality settings may need to be changed from Photo to
Graphics to prevent color inconsistency if a disc label contains
one color or more than 30% of one uninterrupted color. For all
other labels, the Photo setting is will likely produce the best
results.
1. Access Printing Preferences.
2. Select the Advanced tab.
3. Click on the radio button for Photo or Graphics.
4. Click on the Apply button to retain your changes.
5. Click on the OK button to exit the window.
For more information visit rimage.com/support
down menu.
11