Ergonomic Setting; Adjusting The Horizontal Saddle Positi On And Tilt; Adjusting The Brake Lever Distance; Maintenance - HNF-NICOLAI XF3 Adventure Originalbetriebsanleitung

5. Ergonomic setting
5.1. Adjusting the horizontal saddle positi on and tilt
You can determine the optimal horizontal sadd-
le position by using the „knee plumb line" by
dropping a string with a weight from the front
of your knee down. The knee plumb bob should
fall through the pedal axle or in front of it.
Sit on the pedelec in the position shown with
the crank arms horizontal and let a second per-
son determine the knee plumb line.
The upper side of the saddle should be aligned horizontally slightly tilted forward.
To adjust the saddle position and inclination, loosen the two screws of the saddle
clamp, which are located under the head of the seat post. Adjust the horizontal
saddle position and inclination and then tighten the two bolts evenly with 7 Nm.
5.2. Adjusting the brake lever distance
You can adjust the distance between the brake
levers and the handlebars with a Torx-25 key on
the screw marked red.
6.

Maintenance

To keep the pedelec functional and safe, it must be regularly maintained. Please note
the following information before each maintenance measure.
Maintenance requires technical skills. You yourself are responsible for the
correct execution of the maintenance.
→ If you do not feel confident enough to do the work, return the bike to
an HNF-NICOLAI dealer for maintenance.
The frame does not offer any intended possibilities for geometry adjust-
ment.
→ Do not adjust the ET-Key (eccentric component behind the shock
absorber) and do not adjust the ratchet of the strut!
Ergonomic setting/Maintenance
115