Rohloff E; Gates Carbon Drive System - HNF-NICOLAI XF3 Adventure Originalbetriebsanleitung

4.2. Rohloff E-14
• The two buttons next to the right handlebar
grip are used to change gears.
• A single press shifts one gear.
• A longer press shifts 3 gears at once.
• The Bosch eBike system detects the gear
change and briefly reduces the engine
assistance, so that gear changes are possible
under load or up a hill.
If the pedelec is brought to a standstill from a speed of more than 10 km/h, the
system can automatically switch back to a set „starting gear". This can be set as
follows:
• Switch on the system
• Navigate in the Kiox menu as follows:
→ Settings
→ my eBike
→ eShift
→ Starting gear
...and then set the starting gear there.
Due to the construction of the Rohloff hub, a freewheeling noise can be
heard in some gears. In gears 5, 6 and 7 the noise is most clearly audible.
If the pedalling force or cadence is high, a buzzing noise typical of precis-
ion gears with straight teeth can be heard in gears 1 to 7 (getting louder).
In the course of the first 1,000 km the Rohloff hub retracts and the riding
noises become quieter as well as the gear changes softer.
4.3.

Gates Carbon Drive system

On delivery, the belt is optimally tensioned and does not need to be retensioned
even after long use of the drive. Correctly installed, the belt is extremely resilient in
the direction of tension. The carbon fibres embedded in the belt are very flexible,
but react sensitively to subsequent mishandling:
Use
111