GCE Druva MEDIUNIT Bedienungsanleitung Seite 3

3. OPERATIONAL, TRANSPORT AND STORAGE
SAFETY REQUIREMENTS
KEEP THE PRODUCT AND ITS ASSOCIATED EQUIPMENT AWAY FROM:
• All sources of heat
• Flammable materials
• Oil or grease (including all hand creams)
• Water
• Dust.
The product and its associated equipment must be prevented from fall-
ing.
Always maintain oxygen cleanliness standards.
Use only the product and its associated equipment in a well ventilated
area.
OPERATING CONDITIONS
Before first use the product must be kept in its original packaging to en-
sure that the product is not contaminated. For transport and storage GCE
recommends use of the original packaging (including internal sealing bag
and caps).
Statutory laws, rules and regulations for medical gases, accident preven-
tion and environmental protection must be observed.
SAFETY OPERATION
TU described in this document must only be used with medical gases
and the procedures for the safe and effective use of these medical com-
pressed gases must be followed at all times.
4. PERSONNEL INSTRUCTIONS AND TRAINING
According to Medical Devices Directive 93/42/EEC the product provider
must ensure that all personnel handling the product are provided with the
operating instructions & performance data and are fully trained to carry out
that operation. Trainees need to be supervised by an experienced person.
Do not use the device without being trained. Training can be only done
by a person with an appropriate education, experience and knowledge
that has been also trained by the manufacturer.
-20/+60 °C
10/100%
600/1200 mbar
3/152
STORAGE, TRANSPORT
CONDITIONS
-30/+70 °C
20/70%
600/1200 mbar
EN