Safety Notes; Technical Data - Me ADV B40 Betriebsanleitung

VDV-B90 | ENGLISH
ID code
If several outdoor stations are switched in parallel (e.g. at the gate ent-
rance and the house) then the ID code is set via the dip switch (6). This
makes it possible to activate the individual outdoor units in sequence,
e.g. in order to monitor the coverage of the relevant outdoor unit. The
switch is carried out on the indoor station with the 'monitor' switch.
ID1 = Switch 1 'on' Switch 2 'on'
ID2 = Switch 1 'off' Switch 2 'on'
ID3 = Switch 1 'on' Switch 2 'off'
ON
Opening time of the door opener
N
The dip switches (7) are used to set how long the door opener should
EUR
be activated. The possible settings are either 1 second or 5 seconds.
N
5 seconds are set at the factory and function for most standard door
openers.
Switch 1 'off', Switch 2 'on' is equivalent to an
opening time of 1 second.
Switch 1 'on', Switch 2 'off' is equivalent to an
opening time of 5 seconds.
GB
OPERATION
1. Press the bell push-button.
2. The preset ring tone sounds on its inside station/s and the screen
displays the outside station view (VDV-B90 only).
3. Accept the dialogue on the inside unit by briefly pressing the press-
to-talk button (MOUTH).
4. If an additional camera is present at the outside station, you may
switch over to this camera by pressing the "MONITOR" button.
Pressing the „Monitor" button again switches you back to the
internal camera.
5. If a door opener is connected then you can activate the door opener
by pressing briefly on the door opener button (KEY).
6. Switch the system back to standby operation by briefly pressing the
speak button (MOUTH).

TECHNICAL DATA

Operating voltage:
Current consumption:
Camera detection angle:
Temperature range:
Door opener connection:
VDV-B90+40_I-Manual_210x240_Fin3.indd 12
15 V DC
130 ± 50 mA
135° horizontal / 100° vertical
-20°C to +50°C
DC 12V, max. 0.9A
NOTES
The functionality of the unit can be affected by the influence of strong
static, electrical or high frequency fields (discharging, mobile phones,
radios, microwaves).

SAFETY NOTES

The warranty will be null and void in case of damages arising from
violations of these operating instructions. We are not liable for
consequential damages!
We accept no liability for material damages or injuries arising from
inappropriate use or violation of the safety instructions. In such cases
all warranty claims are null and void!
For reasons of safety and licensing (CE), unauthorised conversion and /
or modification of the product is prohibited.
Do not take the product apart! There is a danger of lethal
electric shock!
Do not leave packaging material lying about since plastic foils and
pockets and polystyrene parts etc. could be lethal toys for children.
Do not allow the device to get moist or wet.
Please consult a specialist should you have doubts regarding the
method of operation, the safety, or the connections of the device.
Handle the product with care – it is sensitive to bumps, knocks or falls
even from low heights.
2 YEAR LIMITED GUARANTEE
For two years after the date of purchase, the defect-free condition of
the product model and its materials is guaranteed. This guarantee is
only valid when the device is used as intended and is subject to regular
maintenance checks. The scope of this guarantee is limited to the
repair or reinstallation of any part of the device, and is only valid if no
unauthorised modifications or attempted repairs have been undertaken.
Customer statutory rights are not affected by this guarantee.
12
09.05.14 11:48