Function - Gemini PMX-20 Bedienungsanleitung

4
FUNCTION ENGLISH //
TOP VIEW
1. Eff ect 1 Button ON/OFF
Turns Eff ect 1 ON or OFF
2. Eff ect 1 Knob
Controls value of Eff ect 1
3. Eff ect Button 2 ON/OFF
Turns Eff ect 2 ON or OFF
4. Eff ect Knob 2
Controls value of Eff ect 2
5. Loop Size Encoder
Turn to increase or decrease loop size
6. Loop Button ON/OFF
Turns looping for associated deck ON or OFF
7. Hotcues Mode Button
Switches buttons 1-8 to HOTCUE mode
8. Samples Mode Button
Switches buttons 1-8 into SAMPLES mode
9. Hotcue Buttons
Triggers or sets Hotcues
10. USB Button
Switches channel source from external to
USB audio interface
11. Channel Gain Knob
Turn to change input gain of channel
12. High Frequency EQ Knob
Turn to adjust the High EQ value
13. Mid Frequency EQ Knob
Turn to adjust the Mid EQ value
14. Low Frequency EQ Knob
Turn to adjust the Low EQ value
15. Dual Pole (HP/LP) Filter Knob
• Turn to adjust fi lter for selected channel
• Center - No Filter Eff ect
• Clockwise from center – High-pass Filter
• Counter-Clockwise from center – Low-pass
fi lter
16. FX Send Button
Press to send channel audio to eff ects loop
17. CUE/PFL Button
Press to insert channel into Cue (PFL) bus
18. 45mm Channel Fader
Move to increase or decrease volume for
selected channel
19. Channel LED Meter
Shows pre-fader level of selected channel
20. Load Deck 1/3 Buttons
Loads selected track into the Deck 1 or Deck
3 Player
21. Load Deck 2/4 Buttons
Loads selected track into Deck 2 or Deck 4
Player
22. Track Search Encoder
Turn to scroll through library/Press to enter
a directory
23. Back Button
Press to go back one directory
24. Forward Button
Press to go into the highlighted directory
25. Master Volume Knob
Turn to increase Master Output Volume
26. Booth Volume Knob
Turns to increase Booth Output Volume
PMX-20
DIGITAL PERFORMANCE MIXER
27. FX Return Knob
Adds FX return signal back to Master Bus
28. Talkover Button
Lowers the volume of the non-microphone
channels
29. Mic On/Off Button
Turns the mic channel on or off
30. Mic Level Knob
Turn to increase volume of attached
Microphone
31. Cue Split Knob
Splits cue between Cue bus and Program bus
32. Cue Level Knob
Turn to increase or decrease volume of Cue
bus
33. Master Bus LED Meter
Shows level of Master bus
34. 45mm Crossfader
Move to select channel audio sent to Master
bus
REAR VIEW
35. Power Button
Turns mixer on or off
36. Master XLR (Balanced) Outputs
Professional-grade stereo outputs
37. Master RCA (Unbalanced) Outputs
Consumer quality Stereo outputs
38. Booth Output
Output for monitoring speakers
39. Record Output
Output for recording devices
40. USB Type-B Connector
To connect PMX-20 to a computer
41. CH4 Line/Phono Switch
Switch to control level of CH4 input
42. CH4 RCA Inputs
Input for CH4 Source
43. CH3 RCA Inputs
Input for CH3 Source
44. CH3 Line/Phono Switch
Switch to control level of CH3 input
45. CH2 Line/Phono Switch
Switch to control level of CH2 input
46. CH2 RCA Inputs
Input for CH2 Source
47. CH1 RCA Inputs
Input for CH1 Source
48. CH1 Line/Phono Switch
Switch to control level of CH1 input
49. Microphone Input Combo Jack
Connect XLR or 1/4" TRS Dynamic
Microphone
50. FX Send Output
RCA Output for FX Send Loop
51. FX Return Input
RCA Input for FX Send Loop
52. IEC 3-Prong Mains Power connector
Mains AC Power connector
53. Ground for use with TT sources
54. Kensington Lock Connection
Connect Kensington Lock to secure mixer