SYMA X300 Gebrauchsanweisung Seite 9

4.High/Low Speed Function:
High/low speed mode
5.360°Stunt Flip Function:
3m
Note: The drone will have the best stunt flip action when the batteries are fully charged.
6.Optical flow Hover & Auto Hover Function:
①Optical flow hover function
②Auto Hover Function:
After using the left joystick (throttle) to control the ascending/descending flight
of the drone, release the left joystick (throttle) and the drone will hover at that
height when the joystick is released.
Briefly press the right joystick to switch
between high and low speed mode.
1. Low speed mode is enabled by
default when the aircraft is switched
on.
2. The remote control beeps twice when
high speed mode is enabled and
once when low speed mode is
enabled.
When you are familiar with the basic actions, you can
proceed to explore even more exciting stunt actions. Fly
the drone to a height of above 3 m above the ground,
press the upper right corner button (Stunt Flip Button)
on the remote control and simultaneously push the right
joystick to the farthest position of Front/Back/Left/Right,
the drone will now execute the Front/Back/ Left/ Right
stunt flip function.
When the drone is turned on, the drone will automatically
start the optical flow positioning function when hovering in
the air, and the drone will remain stationary at a certain
point.
Note：
1.Achieve fixed-point accuracy of about 0.5 meters.
2.If the light is dark, the ground reflects, the height is
greater than 12 meters, or the wind is above level 2,the
optical flow positioning will influenced under these
conditions, at this time the indicator light of the drone will be
flashing three times.
-8-
English