SYMA X300 Gebrauchsanweisung Seite 6

Inserting the remote control batteries
Battery Cover
* When installing the batteries, ensure that you match the + and – ends
of the battery with the + and – signs on the controller.
* During the battery installation, it must be ensured that the polarities
of the batteries are matched with that of the battery box. No battery
!
shall be installed with the opposite polarity.
* Please do not use new and old batteries together.
* Please do not use different types of batteries together.
* Do not use rechargeable batteries.
Flight preparation and turning the aircraft on/off
Pairing the remote control with
the aircraft
Press the power button of
the remote control.
3
4
Turning the aircraft on
Method one
Move the left stick (throttle)
fullyup, after let it come
back to the middle and the
motors will start spinning.
1
3
1
Push the left and right
joysticks downwards in
a V shape for 1 second.
2
Press the power button on the top of the drone
to 1-2S make sure the drone is turned "ON".
Indicator stays constant when
pairing is complete.
Method two
-5-
English
4 x AA Batteries
2
Method three
One-touch take-
off/landing