System Setting; System Information; Factory Default; Ota Update - SetOne TX-1200 Bedienungsanleitung

5. System Setting

5.1 System Information

Here you can see which software up-to-date on your Receiver are.

5.2 Factory Default

In this menu you can put the Receiver
back into the ex-factory status. All by you
made settings and stored data are
deleted (e.g. program list, favorite list
etc.),

5.3 OTA Update

In this menu you can upgrade your
receiver with available newest software to
keep you receiver up to date. It options for
OTA(=Over the air) directly from satellite
download
OTA: In this menu option you can get the newest software on your Receiver.
The software is downloaded over the satellite Astra 1E.
Don't change anything in the preset parameters.
Select the point „update ", which looks for Receiver now whether there is an
updated software-Version for your Receiver. If the message comes „OK" you
has already the newest software on your Receiver, terminate the Download with
„exit "- key.

5.4 RCU code (optional)

If you want to operate several Receiver of this type with a remote control unit,
you can specify in this menu option, to which switch position to your remote
control unit of the Receiver is to react. You find the change over switch in your
remote control unit underneath the batteries (covers open). This function is
available only optionally.

5.5 Hotel Mode

If you place this mode „on", according to standard all menu options are
password-protected.

5.6 Standby Display

Here you can set whether your Receiver indicates the current time to mode in
the display during the Standby, or whether nothing the display is to indicate.
20