Satellite List; Transponder List - SetOne TX-1200 Bedienungsanleitung

Scan
To select "scan " (red key) to start the searching. In the following submenu of it
you should first select what kind of the search function for the selected satellite:
FTA (Free To Air)/ FTA + NIT / ALL / FTA + NIT

3.3 Satellite list

The following menu options are for you to deal with the satellites:
Satellite add
Select this menu option you can add a new satellite into your list . Pressing the
yellow key, and then you are given a new
satellite list which are ranked
alphabetically. With the key VOL► you
can reach and choose the appropriate
degree of longitude as well as the
east/west . And press the key "OK ", the
new satellite is added.
Satellite edit
In this menu, you can view the satellite
information, and edit the satellite by
Rename and Modify Using the "Vol" or
numeric buttons.
Satellite delete
Select this menu option and choose the satellite which you want to delete in
your satellite list. Press the yellow key and confirm in the following menu, the
satellite is deleted.

3.4 Transponder list

In this menu option you can scan, edit, add or delete the individual transponders
of a satellite. With the keys CH▲, CH▼, you can navigate the transponders in
the transponder list. Through pressing the red key, you can deal with the
selected transponder in all sub-menu options after transmitters search.
Transponder add
Press the yellow key to add a new transponder. Enter the following menu and
select the correct frequency, symbol rate and polarization of the new
transponder. Press "memory"to add the new transponder to the transponder list.
Transponder edit
Press the yellow key before you edit the selected transponder. Enter the
following menu and choose the correct frequency, symbol rate and polarization
of the transponder. Select "memory " to save the new transponder data .
18