Global Volume Adjustment (Vol Through); Adjusting The Global Volume (Vpt Setup); Disabling The Global Volume Adjustment (Cancel Vpt) - Silvercrest SFB 10.1 C3 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SFB 10.1 C3
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Please note that setting a longer light duration will shorten
the battery life.

Global volume adjustment (VOL THROUGH)

The global volume adjustment/mute feature allows you to assign the
volume adjustment of a device that does not have this feature (e.g. a DVD
player) to a different device (e.g. a TV). The advantage is that it is not
necessary to press a device button (in the above example, the TV device
button) first and then another device button to switch back to the
playback device (the DVD player in the above example).

Adjusting the global volume (VPT SETUP)

Switching on:
1. Press and hold the
2. Press
3. Press
confirm.
4. Press
The display reads "TO DEV".
5. Next press the device button of the device that you want to assign
the volume control to, e.g. DVD. Then the display shows "FROM
DEV".
6. Next, press the device button of the device from which you want to
use the volume control to, e.g. TV. Then the display will show
"SUCCESS" followed by "VOL THROUGH".
After you have finished performing these steps, you can use the
and buttons to adjust the volume and also mute the sound of the TV
even while in DVD mode.

Disabling the global volume adjustment (CANCEL VPT)

Switching off:
1. Press and hold the
2. Press
3. Press
confirm.
56 - English
button for at least 3 seconds.
, select "CONFIGURE" and press
, select "VOL THROUGH" and press
, select "VPT SETUP" and press
button for at least 3 seconds.
, select "CONFIGURE" and press
, select "VOL THROUGH" and press
to confirm.
to
to confirm.
to confirm.
to