Use And Maintenance - Delta UV EA Serie Installations- Und Wartungshandbuch

● Allow the ultraviolet lamp to cool for at least 10 minutes before
handling.
● Never look at the ultraviolet lamps when lit. This may cause
severe injuries or burns and may even lead to loss of eyesight.
● Do not touch the ultraviolet lamp with bare hands, as these would
leave impurities that shorten the life of the lamp. If you do touch it:
clean with alcohol or white vinegar.
● Never unscrew the quartz tube sealing nut when the reactor is on
load as the quartz tube could be blown out of the reactor with force
and injure you.
● To avoid electric short-circuits, do not place the electric wires or
the reactor in the pool water or in any other maintenance or cleaning
fluid.
● Do not restart the system until the electric unit, the covers exterior
elements of the reactor are correctly back in place.
● When replacing the lamp or carrying out annual cleaning of the
quartz tube, make sure that the electrical elements are in place and
correctly attached before switching on the reactor.
● Do not use the DELTA UV reactor for any other use than that for
which it was designed.
● UV-Lamp CONTAINS MERCURY. Manage in accord with
disposal laws.
Delta_EA_(Multi).docx, version D, édition du 06/11/2013
Copyright DELTA UV
Marque, Modèles et Brevets déposés - Produits exclusifs

USE and MAINTENANCE:

Page 22/66