Use And Maintenance - Delta UV ELEKTRA UV Installations- Und Wartungsanleitung

7 Allow the ultraviolet lamp to cool for at least 30 minutes before
handling.
7 Never look at the ultraviolet lamps when lit. This may cause
severe injuries or burns and may even lead to loss of eyesight.
7 Do not touch the ultraviolet lamp with bare hands, as these would
leave impurities that shorten the life of the lamp. If you do touch it:
clean with alcohol or white vinegar.
7 Never unscrew the quartz tube sealing nut when the reactor is on
load as the quartz tube could be blown out of the reactor with force
and injure you.
7 To avoid electric short-circuits, do not place the electric wires or
the reactor in the pool water or in any other maintenance or cleaning
fluid.
7 Do not restart the system until the electric unit, the covers exterior
elements of the reactor are correctly back in place.
7 When replacing the lamp or carrying out annual cleaning of the
quartz tube, make sure that the electrical elements are in place and
correctly attached before switching on the reactor.
7 Do not use the Elektra UV reactor for any other use than that for
which it was designed.
7 Hg-Lamp CONTAINS MERCURY. Manage in accord with
disposal laws.
V5 Elektra E et ES Anglais.doc
Marque, Modèles et Brevets déposés - Produits exclusifs

USE and MAINTENANCE:

Copyright DELTA UV
Page 5