Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
If necessary, the TECEsolid toilet electronics can be programmed via the TECEs-
EN
martcontrol app.
Connection setup – App
To use the TECEsmartcontrol app you will need
•
TECEsolid toilet electronics with power supply,
•
a Bluetooth enabled device (mobile/tablet) and
•
the TECEsmartcontrol app.
Here is the download code:
After launching the app, a pop-up requires the activation of Bluetooth,
then the Home view of the app opens. When programming the TECEsolid toilet
electronics, choose "Smartflush" (Smartflow is for programming the hygiene
flush):
Press "Pull-down to refresh" or press the "Search for devices" button to allow the
app to search for nearby TECEsolid toilet electronics. Selecting the electronics
shown will establish a connection. To enable the electronics to be recognised,
they must be located within the recognition range of the electronics. You can
access the programming level once you have acknowledged this by pressing
the button:
4
Werbung
