Kessel EasyClean free Auto Mix&Pump Einbau- Und Betriebsanleitung Seite 30

Data
Max. pumping height
Max. pumping capacity
(Permanent) temperature of conveyed material
Tightening torque
Description / use
Door hinge screw A2 bright 6x40
PT-screw KB60x30 WN 1411
PT-screw 100x30 A2
Attachment clamp (refill inlet)
Pipe clamp D=120
Pipe clamp D=84
Requirements, basis of calculations
The parameters for disposal of the system are based on these values:
Pumping capacity (intake capacity) of the disposal vehicle 10 l/s = 36 m³/h
Cold/hot water supply 1 l/s with DN 25
Room temperature at least +15° C
30 / 148
Torque Nm
4.5 ±0.5
4.5 ±0.5
7
3
8-10
8-10
Value
17 m
60 m /h
3
max. 40 °C
Spanner size
T30
T30
T50
ISK 10mm
Socket 13mm
Socket 13mm
016-190_01