Schego TR2 Bedienungsanleitung Seite 32

How to set values
How to set values
Thermostat main display
After connecting the thermostat, you will see the main display.
The thermostat's display shows the following values:

Temperature

Current mode

Status of switching relay
1. To view the MIN and MAX values of measured temperature data, press
2. To delete the MIN and MAX values of measured temperatures, press 'Set'.
NOTE:
If the thermostat has no current temperature data, it will display 'NO DATA' .
Thermostat menu items
1. To access setting mode, press 'Set'.
- You will see the following menu items:

Mode ('Mode menu item' on page 29)

T set ('T set menu item' on page 29)

Hyst ('Hyst menu item' on page 29)

REL Dly ('REL Dly menu item' on page 29)

Scr Flip ('Scr Flip menu item' on page 29)

Scr TO ('Scr TO menu item' on page 30)

Exit ('Exit menu item' on page 30)
2. Use and
3. To change a setting under a menu item, press 'Set' to confirm your choice.
4. To increase a value, press
5. To reduce a value, press
32
to navigate the menu.
.
.
and .