Schego TR2 Bedienungsanleitung Seite 29

Description of the thermostat
Buttons

button: increase desired value

button: reduce desired value

'Set' button: change or confirm settings
Mode menu item
This is where you set the mode:

'Off' mode: the thermostat will act as a simple thermometer. The control function is
disabled, the thermostat only displays the current temperature.

'Cooling' mode: cool function.

'Heating' mode: heat function.
T set menu item
This is where you set the target value for desired temperature.
Setting range: -55.0 to +125.0°C
Hyst menu item
This is where you set the temperature hysteresis (switching accuracy).
Setting range: 0.1 to 10.0°C (in 0.1°C increments)
REL Dly menu item
This is where you set the relay's (power socket's) switch-on delay.
This setting can be very useful of the switch-on and switch-off temperature value is al-
most identical. It will prevent frequent switching where the temperature varies rapidly.
Setting range: 0 to 999.9 s
Scr Flip menu item
This is where you set display orientation:

'Normal'

'Flipped 180°'
You can plug the thermostat into a power socket with the buttons either above or below
the display.
Description of the thermostat
29