SATA AE1022H Bedienungsanleitung Seite 67

4.3 Installation
4.4 Operation instructions
The control handle is used to control the rising and falling of the tire pressing block and the tire pressing wheel, so as to adapt to the
height of tire mounting and dismounting.
AE1022H/AE1022H-3
中文
EN
1) Fix the auxiliary arm on the corresponding hole position of the
chassis with 4 outer hexagon socket head bolts (M10*40), 2 outer
hexagon socket head bolts (M10*120) and 2 self-locking nuts
(M10), and connect the supporting leg to the column guide rail
with outer hexagon socket head bolts (M10*25).
2) Mount the rotary tire pressing arm, fixed tire pressing arm
and tire supporting arm on the sliding sleeve components, and
insert corresponding air pipes.
DE RU KO PT JA ES
67