SATA AE1022H Bedienungsanleitung Seite 52

Technical Outside clamp
parameters diameter
AE1022H
10-20"
AE1022H-3
Technical Crankset rotation
parameters speed
AE1022H
6.5 rpm
AE1022H-3
Please check the products immediately after unpacking to ensure that they are in good condition. If any missing or damaged parts are found,
please call the customer service department of SATA Automotive Technology (Shanghai) Co., Ltd:
400-820-3885, 800-820-3885.
Please record the serial number of the product:
Note: If the product does not have a serial number, please record the purchase date.
Please keep the operation instructions properly:
1) The operation instructions cover product safety warning, installation and operation, maintenance, common fault handling, etc. Please
take good care of it.
2) Please record the serial number (or purchase date) of this product on the front page of the operation instructions, and keep the
operation instructions in a dry and safe place for reference.
3) Please use the product correctly on the basis of fully understanding the contents of the instructions.
4) Product liability insurance has been covered for the product.
52
AE1022H/AE1022H-3
Inside clamp
diameter
12-24"
Working pressure
8-10 bar
中文
EN
Maximum tire
Rim width
diameter
3"-13" 39"(1010mm)
Working noise Carton size
1000*920*1000mm
1150*520*300mm
≦ 70 db
1000*920*1000mm
1150*520*300mm
DE RU KO PT JA
Large cylinder
push-pull effort
2100 kgf
Gross weight
336/294 Kg
88/75 Kg
332/290 Kg
88/75 Kg
ES