Zanussi ZKS851DX Benutzerinformation Seite 7

Step
1.
Switch appliance on
2.
Touch
Until the appliance is next switched off, it can used as normal.
After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds,
otherwise the appliance automatically switches itself off.
Switching off the child safety device
Step
1.
Switch on appliance. Do not set a heat setting.
2.
Touch for 4 seconds
3.
Switch appliance off.
The child safety device is switched off.
Switching the power function on and off
The power function
the induction cooking zones, e.g. to bring a large quantity
To switch on
Touch
To switch off Select the heat setting 1-9
Power Management
The cooking zones of the cooking surface have a maxi-
mum power available to them. Maximum power is
reached if all cooking zones are set to a heat setting of 9.
Two cooking zones make up a pair (see figure).
Between these cooking zones the maximum power avail-
able is distributed by the Power Management. If the Power
function is set for a cooking zone, the additional power
needed for this cooking zone is transferred by the Power
Management reducing the power of the other cooking
zone in the pair.
Example: heat setting 9 is selected on a cooking zone. The
Power function is switched on for the cooking zone paired
up with it. The Power function is performed, but heat set-
ting 9 on one cooking zone and Power function on the
other cooking zone of a pair exceeds the maximum output
Control panel
for 4 seconds
Control panel
makes more power available to
Control panel
above
above
of water to the boil quickly. The power function is activated
for 10 minutes at most. After that the induction cooking
zone automatically switches back to heat setting 9.
The light elements in the control bar light up. The
flashes
The heat setting selected is shown in the display. The display
above will go out.
for both. Therefore Power Management reduces the first
cooking zone that was switched on from 9 to 5, for ex-
ample, and the display for this cooking zone alternates
between 9 and 5 and then remains on the current maxi-
mum of 5. (Whether the display alternates between 9 and
5 or 9 and 3 or other values, depends on the appliance
type and the size of the cooking zone.)
Pilot light
above lights up
above goes out
Pilot light
lights up
goes out
Display
display
7