Locking/Unlocking The Control Panel; Using The Automatic Warm-Up Function - Zanussi ZKS851DX Benutzerinformation

Switching the appliance on and off
Control panel
To switch on
Touch
To switch off
Touch
After switching on, within approx. 10 seconds a heat
setting or a function must be set, otherwise the ap-
pliance automatically switches itself off.
Setting the heat setting
The control bar is touched where the desired heat setting
is positioned. The heat setting is shown in the display.
Correct to the left or the right, if necessary. Do not release
before the desired heat setting is reached.

Locking/unlocking the control panel

The control panel, with the exception of the "On/Off" sen-
sor field, can be locked at any time in order to prevent the
To switch on
Touch
To switch off
Touch
When you switch the appliance off, the locking function is automatically switched off.
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all
cooking zones that are switched on to the keep warm set-
To switch on
Touch
To switch off
Touch
STOP+GO does not stop the Timer function.
STOP+GO locks the whole control panel except the

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-
up function. When setting a heat setting using the auto-
for 1 second
for 1 second
Control panel
Control panel
Heat setting that was previously set (not automatic warm up function)
lights up. The operational readiness indicators of the
individual cooking zones also light up.
goes out. The operational readiness indicators of the in-
dividual cooking zones also go out.
settings being changed e.g. by wiping over the panel with
a cloth.
Indicator lights up
Indicator goes out
ting and then back to the heat setting that was previously
set.
Display
sensor field .
matic warm-up function, the cooking zone switches to full
power for a certain amount of time and then automatically
switches back to the heat setting set.
Display
Display
5