Touch Control Sensor Fields; Residual Heat Indicator; Operating The Appliance - Zanussi ZKS851DX Benutzerinformation

11 On/Off with indicator

Touch Control sensor fields

The appliance is operated using Touch Control sensor
fields. Functions are controlled by touching sensor fields
and confirmed by displays and acoustic signals.
Touch the sensor fields from above, without covering
other sensor fields.
On / Off
Lock
Stop+Go
Cooking zone Off
Heat settings
1-9/
Power
Timer
Increase settings
Reduce settings
Displays
Residual Heat
Fault
+ number
Pan detection
Automatic switch off

Residual heat indicator

Warning! Risk of burns from residual heat. After
being switched off, the cooking zones take some
time to cool down. Look at the residual heat indicator
.

Operating the Appliance

Use the induction cooking zones with suitable cook-
4
Sensor field
Display
If the sensor field is touched for longer than 6 sec-
onds, a signal sounds and the appliance switches
it self off
To switch the appliance on and off
Locking/unlocking the control panel
To switch the Keep Warm setting on/off
To switch off the cooking zone
To set heat settings
Switching the power function on and off
Timer selection
To increase Timer time
To reduce Timer time
Cooking zone is still
Malfunction has occurred
Cookware is unsuitable or too small or no
cookware has been placed on the cooking
zone
Switch off is active.
The induction cooking zones create the heat required for
cooking directly in the base of the cookware. The glass
ceramic is merely heated by the residual heat of the cook-
ware.
The cooling fan switches itself on and off depending upon
the temperature of the electronics.
ware
Function
Description