Preparing For Disposal; Technical Data - CMi C-AMBS-7.2 Set Originalbetriebsanleitung

Cleaning
Cleaning overview
Regularly and according to the operating condi-
tions
What?
Clean the ventilation slots
of the motor to remove
dust.
Clean the device.
Error/Fault
Device does not work.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.

Preparing for disposal

Removing the battery
Note: The battery is not replaceable.
At the end of the device lifetime, you should remove
all batteries before disposing of the item.
CAUTION! Risk of injury by splintering!
Do not break device forcefully.
– Open the housing.
– Separate the connections and remove the bat-
tery.
– Dispose of the batteries in accordance with the
regulations.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
charged. Batteries must always be protected against
short circuits by covering the poles with adhesive
tape.
How?
Use a vacuum, cleaning
brush or paint brush.
Wipe the unit with a damp
cloth.
Cause
Is the device defective?
Battery pack discharged?
Battery pack defective?
Troubleshooting
What to do when something doesn't work...
DANGER! Risk of injury! Unprofessional
repairs may mean that your unit will no
longer operate safely. This endangers you
and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possi-
bly money too.
Remedy
Contact your local vendor.
► Charging the battery pack –
p. 35.
Contact your local vendor.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.

Technical data

Part number
Idle revolutions
Protection class
Tool holder
Max. grinding tool size
Noise output level (L
WA
Noise pressure level (L
Vibration**
Weight
Power supply
Rated voltage
Charge voltage
Charge current
Protection class
Battery pack
Battery pack type
Rated voltage
Capacity
Charging time
*) The specified values are emission values and do not necessarily
represent safe workplace values. Although there is a correlation
between emission and immission levels, this cannot be used to
infer whether additional safety measures are necessary or not.
Factors which affect the current immission levels at the work-
place, include the type of room, other sources of noise, e. g. the
number of machines operating and other processes taking
place in the vicinity. Permitted workplace values can differ from
country to country. This information is designed to help the user
to better assess the dangers and risks. Determination of noise
emission values in accordance with EN 60745-1.
**) The specified vibration emission value was measured in accord-
ance with a normed test procedure and can be used in order to
compare one tool with another. The specified vibration emission
value can also be used for an introductory evaluation of the
exposure. The vibration emission value may fluctuate from the
specified value during actual use of the power tool. These fluc-
tuations will depend on the way in which the power tool is used.
Try to keep vibrations to a minimum. One method of reducing
the vibration load is, for example, limiting the length of time you
GB
107352
5000–30000 min
III
ø 3,2 mm
ø 35 mm
)* 88,7 dB(A)
(K = 3 dB(A))
)* 77,7 dB(A)
PA
(K = 3 dB(A))
3,007 m/s²
(K = 1,5 m/s²)
0,84 kg
230 V~, 50 Hz
9 V
1000 mA
II
Li-Ion
7,2 V
2000 mAh
2–3 h
-1
37