Tekno Point CONSOLLE Serie Benutzer- Und Installationsanleitung Seite 40

Buttons on remote controller
FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), fan1(
fan3 ( ) , fan4 (
Note:
● In AUTO speed, air conditioner will select proper fan speed automatically according to
ambient temperature.
● Fan speed under dry mode is fan1.
● After entering the stepless speed mode, users can adjust the fan speed according to the
button "+" or "-".
button
● Press this button the up&down swing function can be started and canceled. The remote
controller defaults to static swing condition.
● Press "MODE" button and "
switch between simple swing and static swing.
● In static swing condition, pressing this button, the swing angle of up&down swing louver
changes as below:
Note:
● When selecting "
conditioner will swing up&down automatically at the maximum angle.
● When selecting "
Up&down swing louver of air conditioner will stop at that position as shown by the icon to
swing.
button
● Press this button the left&right swing function can be started and canceled. The remote
controller defaults to simple swing condition.
● Press "MODE" button and "
switch between simple swing and static swing.
● In simple swing condition,pressing this button, the left&right swing control will cycle as
below: off status, the same direction swing,off status,the opposite direction swing.
), fan5 (
AUTO
stepless speed
" button at the same time when remote controller OFF to
No display
" with remote controller, it's auto swing. up&down swing louver of air
, , ,
" button at the same time at remote controller OFF to
No display
), stepless speed.
fan1 fan2
fan5
, " with remote controller, it's the fixed position swing.
No display
36
), fan2 (
fan3
fan4
) ,