Tekno Point CONSOLLE Serie Benutzer- Und Installationsanleitung Seite 35

Precautions
The appliance must be positioned so that the plug is accessible.
All wires of indoor unit and outdoor unit should be connected
by a professional.
If the length of power connection wire is insufficient, please
contact the supplier for a new one. Avoid extending the wire by
yourself.
For the air conditioner with plug, the plug should be reachable
after finishing installation.
For the air conditioner without plug, an circuit break must be
installed in the line.
If you need to relocate the air conditioner to another place, only
the qualified person can perform the work. Otherwise, it may
cause personal injury or damage.
Select a location which is out of reach for children and far away
from animals or plants.If it is unavoidable, please add the fence
for safety purpose.
The indoor unit should be installed close to the wall.
Under special circumstances when a fault occurs (for example,
when it is powered off and on continuously, and you receive
the "L3 Communication between Indoor and Outdoor failure"
warning) when an air conditioning system operates as a unit
, you can shut down and then power on again to eliminate the
fault.
Working temperature range
Maximum cooling
Maximum heating
The operating temperature range (outdoor temperature) for cooling only unit is 18°C~ 48°C,
for heat pump unit is -7°C~ 48°C.
Indoor side DB/WB(°C)
32/23
27/-
31
WARNING
Outdoor side DB/WB(°C)
48/30
24/18