Dimensions And Illustrations - Kindermann Deckenlift compact Montageanleitung

• Lift beyond the stop position so that the concertina elements are extremely opened and the carrying ropes are loose:
move the lift back until the ropes are tightened; press the micro switch.
• Motor overheated in operation, power cut via thermo switch; let the motor cool down for approx. 15 minutes
(only short time operation of 4 minutes possible).
• Brakes are blocked (motor makes noises): Contact the service team.
• Lift in upward position cannot be lowered again: Take off the ceiling plate, check if the lift was moved above the
upper stop position (error) and was blocked. Try to pull down the lift while giving the DOWN command, to loosen the
mechanical blockage. Programme the upper stop position anew.
➡ UP and DOWN mixed up
• Control cables are mixed up: Separate the unit from the mains and exchange the wiring.

7. Dimensions and illustrations

• Space for projector within the cross bar: 35 x 54 cm (BxL)
• Space for projector below the cross bar: 47 x 56 cm (BxL)
• Projector weight: max. 20 kg
• Required ceiling cutout: 600 x 500 mm
• Measure X = 0 bis bis 280 mm
• Required cable length within the ceiling lift 7466000 050: ca. 2 m (7466 000 051 ca. 3 m)
7466000 050/7466000 051 D/GB 2013-08/842 045
Kindermann GmbH · Mainparkring 3 · D-97246 Eibelstadt · E-Mail: info@kindermann.de · www.kindermann.com
Änderungen vorbehalten / Subject to alterations Printed in Germany