Herunterladen Inhalt Inhalt Diese Seite drucken

Mounting Of Ceiling Lift Compact; Preparation For Ceiling Mounting; Different Ways Of Mounting - Kindermann Deckenlift compact Montageanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3. Mounting the ceiling lift compact
3.1 Preparations for ceiling mounting
Make sure that the construction of the ceiling is suitable for permanently holding the projector and the ceiling lift. Provide
the necessary fixing material in special stroes. Use screw dimensions (M8) and steel plugs for concrete ceilings resp. suitable
screws for wooden ceilings.
The construction of the ceiling should hold at least four times the maximum weight of the projector and the lift (4 x 50 kg).
The surface of the real ceiling should be even and clean to keep the lift and the projector clear of any dirt particles.
Insulation material should be wrapped up with PE foil. It is recommended to build a box around the projector garage to
protect against dust and to conceal the open space above the false ceiling when the lift is down. An additional maintenance
flap in the ceiling would help.
It is ideal to mount a triple mains socket (230 V~) in the projector garage for the projector and additional units. The wiring
should be deactivated via a mains switch. All the required video and audio cable as well as projector control cables have
to be fixed according to standard regulations. The specifications of the electrical connections for the electrician follows in
paragraph 4.

3.2 Different ways of mounting

The lift needs an opening in the ceiling of at least 60 x 50 cm. The cutout can be inserted into the optional T-profile frame.
The required minimum installation depth must be guaranteed.
On delivery the cross bar
is adapted to mounting a projector within.
7
Maximum space for projector within the cross bar: 35 x 54 cm.
Minimum installation depth: 6.5 cm + projector height, at least 12 cm (Compact 80).
Minimum installation depth: 9 cm + projector height, at least 14 cm (Compact 120).
Projectors up to a maximum size of 47 x 56 cm (BxL), must be mounted below the rotated cross bar
.
7
Maximum space for projector below the cross bar: 47 x 56 cm.
Minimum installation depth: 13 cm + projector height (Compact 80).
Minimum installation depth: 15 cm + projector height (Compact 120).
20

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Deckenlift compact 120

Inhaltsverzeichnis