Scandomestic SFO 2203 W Bedienungsanleitung Seite 23

Meanwhile, the cabinet around the inward booster: both sides of
the (C-555) / 2 +3; C, D and E as the second step within the rele-
vant size decorative panels.
A Electrical, drain band, water supply line entrances, both
sides
B Space of cabinet
Step 2:
Aesthetic panel's dimensions and installation
Weight of the decorative panel should be min 3Kg-max 4Kg. Dim.
A and B could be alterable by handle,
Dim. C, D and E could be alterable by fact,
Dim. E should be in range 16~22mm, besides the appliance as-
sembling decorative panel.
8 stk ø2mm (12 mm deep)
2 stk ø15 (5 mm deep)
2 stk ø6 mm (through) for mount of handle
Step 3:
Assemble the decorative panel
NOTE:
If the machine with a decorative plate, no this step.
Step 4:
Assemble the decorative door on the dishwasher, as figure. First
install screw between the cabinet base board and decorative
panel, in all 16; then pull glide from out door groove, case 8-
screw between decorative panels and glide .
Cabinet base board Install the hingle by screw,in all 16
A Cabinet base board
B Screw in all 16
A Decorative panel
B Cabinet base board
C Screw in all 16
D Screw, in all 8